Skip to main content

China Plastic Pipe Fitting Mould Manufacturing

Plastic pipe fittings can be used for drainage pipes, water supply pipes, mining pipes, communication pipes, and there has been a great demand in the construction industry, municipal engineering, water conservancy engineering, agriculture and industry and other industries.

As an experienced pipe fitting mold manufacturer, PlasticsMould.COM provides various types of plastic pipe fitting molds, from straight-through, tee, cross, elbow, plug, joint, and reducing pipe fittings to manufacture corresponding high-quality molds.

Pipe fitting mold specifications

1. PVC pipe fitting mould

a. CPVC pipe mould is used in high pressure area

b. UPVC pipe mould is used for drainage

c. PVC flared pipe mould (core-pulling system is used for water supply)

d. Wire and pipe moulds, various PVC pipe fittings inlaid in the wall



2. PPR pipe fitting mould

Water supply system for indoor buildings

3. PP/PPH pipe fitting mould

a. PP or PPH flaring pipe fitting mould with core pulling system

b. PP drainage pipe fitting mould

c. PPH bathroom mold for bathroom.

4. Special pipe fitting mould made of ABS, PA+GF, PPSU materials


Pipe fitting mold type

1. Core-pulling pipe fitting mould

2. Threaded Rotary Pipe Fitting Mould

3. Radial core-pulling pipe fitting mould

4. Hydraulic slide pipe fitting mould


PlasticsMould.COM has been exploring and summarizing many years of production experience. It has a complete set of pipe fitting mold design concepts and manufacturing procedures. In the design, every detail is made through professional analysis and practical summary. In terms of workmanship It is also placed in the hands of a master who has been manufacturing pipe fitting molds for many years. At the same time, we have a series of high-precision mold processing equipment to ensure mold size accuracy and provide customers with the most worry-free products with quality.

Labels:

Comments

Post a Comment

Popular posts from this blog

Plastic mold design must be grasped when it must be grasped

  1. The focus during design (1) The inlet of the inlet should be opened in the thick part of the product to ensure the smooth and complete charging model; (2) Try to open as much as possible at the edge or bottom; (3) The cold material cave near the pouring mouth is often set up to facilitate the lane -of -the -way release; (4) Large or flat products, it is recommended to use multi -point pouring, which can prevent the product’s warning and lack of materials; (5) The position of its position should be selected to the shortest point of the plastic charging process to reduce the pressure loss, which is conducive to mold exhaust; (6) Avoid opening the mouth near the slender core, so as not to directly impact the core core, generate deformation or bending; (7) The size of the mouth is determined by the size of the product, the geometric shape, the structure and the type of plastic. (8) You can determine the product’s combination line that produces due to the location of the mouth thro...
Post a Comment
Read more

The design idea and process of a set of practical injection molds

A reliable plastic mold design is mainly reflected in the quality (appearance quality and size stability) of the forming plastic products. It is convenient, fast, and concise when processing and manufacturing. Safe, stability, easy maintenance, short molding cycle, long life life, and reasonable mold manufacturing process in injection molding. 01. The main process of factory mold design Customers provide product map → analyze product → confirm plastic varieties → confirm mold material → transfer engineering chart → multiplier as a mirror phase → improve the formation map → make models → make models → unplugged → 3D division → determine the runner road /Putting the mouth method → refer to the rank diagram for structural design → disassembling mosaic → correction 3D → engineering drawing (mold/inlaid parts/mold/loose parts) → do BOM table → school pairing review. 02. Several aspects that should be paid attention to 1) When we start the mold design, we should pay more attention to severa...
Post a Comment
Read more